D | B | KW | Z | K | P | H | a | b | Código | Disponibilidad |
---|---|---|---|---|---|---|---|---|---|---|
180 | 40 | 21+3 | 2,5 | 1,8 | 30 | 18° | FLAT | 280.021.07S | ![]() |
|
200 | 40 | 21+3 | 2,5 | 1,8 | 35 | 18° | FLAT | 280.021.08S | ![]() |
|
250 | 70 | 21x5 | 20+4 | 2,7 | 1,8 | 50 | 18° | 10° ATB | 280.020.10V | ![]() |
250 | 80 | 13x5 | 20+4 | 2,7 | 1,8 | 50 | 18° | 10° ATB | 280.020.10W | ![]() |
300 | 70 | 21x5 | 24+4 | 2,7 | 1,8 | 60 | 18° | 10° ATB | 280.024.12V | ![]() |
300 | 80 | 13x5 | 24+4 | 2,7 | 1,8 | 60 | 18° | 10° ATB | 280.024.12W | ![]() |
-Altura diente mm: | 10 |
-Calidad, código ISO: | K20 |
-Dureza (HV10): | 1.640 |
-Resistencia (N/mm2): | 2.200 |